Contact
Sales ROTEX®
T: +49 5971 798-0
E: sales@ktr.com

Engineering ROTEX®
T: +49 5971 798-214
E: info-rotex@ktr.com

0 - 12,500 Nm

ROTEX® SD shiftable jaw coupling

Coupling shiftable at standstill

The torsionally flexible jaw coupling ROTEX SD is an elastomer coupling shiftable at standstill (shiftable coupling).

The shiftable ROTEX coupling type SD enables easy disconnection and connection of the driving and driven side with standstill of the plant. 

Please note with shiftable coupling ROTEX SD:
Shiftable linkage also available with locking pins, lock device and  retrieval of shifting position via sensors.

Features
  • Jaw coupling / shiftable coupling shiftable at standstill
  • Easy disconnection resp. connection of driving and driven machines with standstill of the plant
  • Shiftable hub available can be combined with slip ring and shiftable linkage
  • Pilot bored shifting hubs must be set to the necessary shifting force after final machining
  • Complete shifting device consists of split slip ring made of red brass, shifting fork, shifting shaft, shifting lever, eye-type bearing
  • Torsionally flexible
  • Vibration-damping
Send product request

General description of flexible jaw couplings:

ROTEX torsionally flexible jaw couplings are elastomer couplings characterized by a compact design.

In spite of low weights and mass moments of inertia of the elastomer couplings they are able to transmit high torques. The compact shaft couplings are characterized by a long service life and sound operating characteristics generated by allover machining.

Thanks to the elastomer (elastomer spider) between the coupling hubs of the jaw couplings shocks respectively torsional vibrations in the drive train are damped. The high temperature-resistant spider material T-PUR (elastomer) is available in various degrees of hardness. The torsionally flexible ROTEX couplings are used in almost every range of general machinery and plant engineering.

Properties of torsionally flexible jaw couplings:

ROTEX shaft couplings consist of two hubs (aluminium or steel) and a spider (elastomer ring / cam ring) made of T-PUR. The different degrees of hardness of the T-PUR-spider allow to adjust the level of damping and torsional stiffness of the elastomer coupling.

ROTEX couplings require few mounting space and thus enable easy assembly/disassembly. The numerous types provide for maximum flexibility and meet with the different mounting requirements through various types of hubs.

Function of torsionally flexible jaw couplings:

Jaw couplings ensure torsional vibration-damping power transmission and absorb shocks generated by machines with irregular operation.

In contrast to flexible couplings the connecting elements of which are subjected to bending and therefore to earlier wear, the flexible teeth of ROTEX couplings (elastomers) are subjected to compressive stress only. The benefit of the elastomer coupling thus is to resist significantly higher loads.

The elastomers become deformed with load and high speeds. Sufficient expansion space must be provided.

All sizes of ROTEX elastomer couplings have a maximum torsion angle of 5°. They can be mounted both horizontally and vertically.

Material of torsionally flexible jaw couplings:

Our elastomer material T-PUR is resistant to higher temperatures and has a considerably longer service life than common polyurethanes. From a visual point of view we marked the T-Pur material by the colours orange (92 Shore A), purple (98 Shore A) and light green (64 Shore D).

The previous polyurethane spiders in the colours yellow, red and natural white with green marking of teeth continue to be available on request.

More products in this area "ROTEX torsionally flexible jaw couplings"