Contact
Sales REVOLEX®
T: +49 5971 798 798-0
E: sales@ktr.com

Engineering REVOLEX®
T: +49 5971 798-214
E: info-revolex@ktr.com

0 - 98,000 Nm

REVOLEX® KX-D SB pin & bush coupling with brake disk

Type of pin & bush coupling with brake disk

The flexible coupling REVOLEX KX-D SB is a fail-safe pin & bush coupling with brake disk.

Depending on the plant REVOLEX couplings are often provided with brake disks, rather infrequently with brake drum. The coupling is either used as a holding brake or as a service brake.

The position of the brake disk is intended on the driven side. With high-speed drives we recommend dynamic balancing from 30 m/s. Safety-relevant drives are preferably combined with steel hubs. Applications with lower demands can be combined with cast iron hubs. 

Combinations with pin & bush coupling and brake:
Available in combination with KTR brakes type KTR-STOP (hydraulic) or EMB-STOP (electromechanical) on request. In addition the customer benefits from a supply from one single source so that there is the option to develop the brake (KTR STOP) as well.

Applications of our pin & bush coupling with brake disk REVOLEX KX-D SB:
Our pin & bush coupling with brake disk is used both as a holding brake and as a service brake, e. g. on conveyor belts, generators, turbine drives, industrial fans, cranes, hoists, etc.

Safety-relevant drives are preferably combined with REVOLEX KX steel hubs. Applications with lower demands can be combined with GJL hubs. "

Features
  • Torsionally flexible, fail-safe pin & bush coupling with brake disk
  • Holding brake or service brake
  • maintenance-free
  • Pins radially mountable/dismountable
  • Machined allover, good dynamic properties
  • Torques up to 98,000 Nm
  • Coupling can be combined with our brake systems 
  • Relatively short shaft distance
  • Compensation of axial, radial and angular displacements 
Send product request
Certificates

Safe torque transmission via the REVOLEX pin & bush coupling

REVOLEX® are torsionally flexible, fail-safe pin & bush couplings that are mainly used in applications with high torques and drives subjected to shocks. They are specifically solid, fail-safe, compensate for any kind of shaft displacement while transmitting the torque reliably.
The REVOLEX pin & bush couplings can be plugged in axially and are characterized by short dimensions. These pin & bush couplings are generally equipped with hydraulically dismountable pins which means that special tools are not required for disassembly. The coupling components of the REVOLEX® pin & bush couplings are maintenance-free and allow for a smooth disassembly of elastomer rings along with pins in mounted condition.

REVOLEX® pin & bush couplings are usually provided with 80 ShA NBR elastomer rings with the standard material being a true all-rounder. NR elastomers are available for low temperature applications. Apart from that backlash-free, electrically insulating NBR elastomers (coloured in blue) are available which are mainly used in cableway drives.

Small pin & bush couplings are relatively expensive with the REVOLEX commencing from a rated coupling torque of 4,300 Nm. The product ranges ROTEX and POLY-NORM are available for low performance ranges.

The pin & bush coupling is made up of two hubs identical in design. Pins and pocket holes alternate on the outside pitch circle of the hubs. The torques are transmitted via the steel pins with taper elastomer rings and the respective bores of the sleeve hub.

Any kind of shaft displacement, e. g. generated by inaccurate alignment of driving or driven elements, is reliably offset and vibrations as well as torque shocks are excellently compensated.
The pin & bush coupling is maintenance-free and used in general engineering as well as pump industry, conveyor technology, etc. Torques up to 1,220,000 Nm are available in 21 sizes for an optimum adaptation to the respective application. As a result customized solutions are available along with the standard product range.

REVOLEX KX-D holds the maritime type approval such as BV Bureau Veritas; ABS American Bureau of Shipping; DNV.GL Desk Nord Veritas. With maritime applications there are special demands acc. to EN 10204 (3.2) on hub bodies and pins.

Applications of our REVOLEX pin & bush couplings: REVOLEX pin & bush couplings are mainly used in safety-relevant applications, drives subjected to shocks with severely high speeds, e. g. marine technology, conveyor technology, chemistry parks, biogas plants, etc. The pin & bush couplings have a fail-safe design operating reliably with rated torques from 3,800 to 1,220,000 Nm.

Our flexible pin & bush couplings REVOLEX®:

More products in this area "REVOLEX pin & bush coupling"