T: +49 5971 798 - 0

Clamping forces up to 16.5 kN

KTR-STOP® XS-A-F active hydraulic floating caliper brake

Service brake for low torque side

The active floating caliper brake KTR-STOP XS-A-F is a typical service brake used on the low torque side. 

All features of this brake are designed to operate reliably under adverse ambient conditions while generating low operating expenses.

Properties of the active spring-actuated floating caliper brake KTR-STOP XS-A-F:

  • hydraulic
  • active
  • disk brake
  • floating caliper brake
  • clamping force up to 16.5 kN

Brakes and couplings by KTR:

The customer benefits from being supplied from one single source. There is the option to combine our brakes with our couplings. The floating caliper brake KTR-STOP XS-A-F can be combined with the following couplings:

  • ROTEX SBAN (jaw coupling with brake disk)
  • POLY-NORM ADR-SBA (shaft coupling with brake disk)
  • REVOLEX KX-D SB (pin & bush coupling with brake disk)
  • RADEX-N (steel laminae coupling)"
  • Clamping forces up to 16.5 kN
  • Applications in the low temperature range
  • Optimum corrosion protection of one-piece brake calipers
  • Optimised floating caliper design
  • Leakage oil connections prevent leakages on the brake pads
  • Short reaction times
  • Easy replacement of brake pads
  • Combination with our couplings ROTEX SBAN, POLY-NORM ADR-SBA, RADEX-N and REVOLEX KX-D SB
Send product request

The active KTR-STOP brakes are hydraulically applied floating caliper brakes provinding the benefit to operate nearly free from axial forces.

Even in case of misadjustment or failures of installation damage of the drive train is consequently prevented.

Applications of our active hydraulic floating caliper brake KTR-STOP:

Depending on the size KTR-STOP brakes are used as service brakes, holding brakes or safety brakes.

  • RADEX-N 

More products in this area "KTR-STOP active hydraulic floating caliper brakes"