RUFLEX® max.

Information about selection of torque limiters

For an accurate selection of the torque limiters (safety couplings) latest simulation and calculation programs are available. So please advise as many details of your drive as possible. The more accurate the data, the more accurate are the calculation results for our torque limiters. Make use of these options and consult with us about the application beforehand.

To make sure the torque limiter is not released with process-related torque peaks already, the shifting torque of the coupling should exceed the maximum operating torque by at least 30 % (see diagramme).

Torque limiters and overload systems that re-engage automatically should be used with reduced speed with high release torques only. Frequent or longer slipping or engaging increases wear of the torque limiter.

After the torque limiter has separated driving and driven side in case of overload, it may take some time before the drive stops due to large mass inertias in the drive train. This may generate early wear of the tourqe limiters and overload couplings that re-engage automatically. That is why we recommend with drives with large mass inertias or higher speeds to use the safety coupling KTR-SI as an idle rotation version.

We basically recommend electrical monitoring of the torque limiter to disengage the drive immediately in case of overload. We will be pleased to assist you with any technical questions about the selection of torque limiters.

The  RUFLEX torque limiters provide for load-holding, frictionally engaged overload protection.  When the torque set is exceeded, the drive element slips.As soon as the occurring torque decreases, the torque limiter automatically continues to transmit the torque.