Product image side ROTEX ZS DKM SH double-cardanic shaft coupling with SPLIT hubs

ROTEX® ZS-DKM-SH

0 - 2,400 Nm / double-cardanic coupling with split hubs

The torsionally flexible jaw coupling ZS-DKM-SH is a double-cardanic elastomer coupling with split hubs (SH SPLIT).

The ROTEX ZS-DKM-SH with SPLIT hub provides the advantage that the coupling can be radially assembled and disassembled without displacing the adjacent power packs. The hub resp. connection of the two hub halves is not weakened by cracking.

This design is also referred to as drop-our center design coupling, half shell coupling, clamping coupling, coupling with split hubs or elastomer coupling with split clamping hub.

The hubs of the double-cardanic jaw coupling ROTEX ZS-DKM-SH are mechanically split by cracking and screwed back together with the assembly. This elastomer coupling is ideally suitable to offset larger radial displacements. Due to the split hubs the coupling can be radially assembled and disassembled without displacing the adjacent power packs.
 

Features

  • double-cardanic jaw coupling for large shaft displacements

  • good damping properties due to double arrangement of spiders

  • spacers adapted to drop-out center length of standard pumps

  • for bigger radial displacements generated by thermal expansion

  • assembly/disassembly via four screws

Product Details

Contact

Michael Brüning

Michael Brüning
Product manager elastic jaw and pin and bush couplings