Contact
Sales BoWex®
T: + 49 5971 798-0
E: sales@ktr.com

Engineering BoWex®
T: +49 5971 798-357
E: info-bowex@ktr.com

0 - 30,000 Nm

BoWex-ELASTIC® HE-ZS(HEW-ZS) highly flexible flange couplings

The coupling type BoWex ELASTIC HE-ZS / HEW-ZS is a highly flexible flange coupling for mounting to I. C.-engines and electric motors.

This type combines the standard flange connection acc. to SAE-J 620 and drop-out center pieces for pump drives.

These drop-out center pieces are available in customized lengths. The HE-ZS / HEW-ZS is applicable up to a maximum operating temperature of 100 °C.  

The flange coupling is assessed and approved for potentially explosive atmospheres acc. to EC directive 2014/34/EU. The drop-out center pieces can be combined with coupling type HE and HEW and allow for radial disassembly of the coupling.

Features
  • Highly flexible flange coupling for mounting to I. C.-engines and electric motors with drop-out center piece for pump drives
  • Elastomer parts available in the hardness T40, T50 and T65 Shore A
  • Compensating for high misalignment
  • Type HE-ZS with flange connection acc. to SAE-J 620
  • HEW-ZS for shaft-to-shaft connection
  • Taper and inch bores
  • Wide stock range with finish bores H7 and keyway to DIN (5)
  • Spline hubs acc. to DIN and SAE standard
  • Lengthened hubs available from stock
  • Special types of hubs available
  • Complying with ATEX (acc. to EU directive 2014/34/EU)
  • UKEX compliant (according to UKEX Directive SI 2016:1107)
  • Max. speed 30,000 Nm
  • Max. circumferential speed vmax= 48 m/s
  • Max. bore diameter 200 mm
Send product request

For drives subject to severe torsional vibrations for flexible torque transmission in the combination of a diesel engine with splitterbox, generator, compressor, feed pump or high-pressure pump, etc.: The BoWex-ELASTIC flange coupling consists of a highly flexible, circular rubber element made of natural rubber stressed for torque-to-bore ratio. The internal axial plug-in hub component with the external spline corresponds to the BoWex basic type. The BoWex-ELASTIC is available in various kinds of elastomer hardness with mounting flanges on the engine side acc. to SAE J620 and with special dimensions for a power up to 5,000 kW.

  • Various kinds of Shore hardness
  • Torsional vibration analyis
  • Supercritical selection
  • Temperature resistance (enabling higher temperatures via EPDM)

MMC coolers

More products in this area "BoWex ELASTIC highly flexible flange couplings"