0 - 2,000 Nm

BoWex-ELASTIC® HE1(HE2) highly flexible flange couplings

The coupling type BoWex-ELASTIC HE1/HE2 is a highly flexible flange coupling with SAE and special flange dimensions for mounting to I. C.-engines.

The design is characterized by a mounting flange made of polyamide available in five coupling sizes and six SAE flange sizes. The flange coupling HE1/HE2 is applicable up to a maximum operating temperature of 100 °C.

The combination with coupling hubs of the BoWex standard range allows for compensating for misalignment of driving and driven side. The coupling is assessed and approved for potentially explosive atmospheres acc. to EC directive 2014/34/EU. Differentiating between the respective type 1 and 2 results in an either short or long version of the coupling.

Features

Highly flexible flange coupling with SAE and special flange dimensions
Damping torsional vibrations
Compensating for misalignment of driving and driven side
Axial joining without subsequent screwing
Available in the Shore hardness T40, T50 and T65 ShA
Taper and inch bores
Wide stock range with finish bores H7 and keyway to DIN
Spline hubs acc. to DIN and SAE standard
Lengthened hubs available from stock
Special types of hubs available
Complying with ATEX (acc. to EU directive 2014/34/EU)
UKEX compliant (according to UKEX Directive SI 2016:1107)
Max. torque 2,000 Nm
Max. circumferential speed vmax=42 m/s
Max. bore diameter 80 mm

Send product request

Downloads

Certificates

Specifications

BoWex HE1(HE2)

General description

For drives subject to severe torsional vibrations for flexible torque transmission in the combination of a diesel engine with splitterbox, generator, compressor, feed pump or high-pressure pump, etc.:

The BoWex-ELASTIC flange coupling consists of a highly flexible, circular rubber element made of natural rubber stressed for torque-to-bore ratio. The internal axial plug-in hub component with the external spline corresponds to the BoWex® basic type. The BoWex-ELASTIC is available in various kinds of elastomer hardness with mounting flanges on the engine side acc. to SAE J620 and with special dimensions for a power up to 5,000 kW.

Damping performance

Various kinds of Shore hardness Torsional vibration analyis Supercritical selection Temperature resistance (enabling higher temperatures via EPDM)

Combinations

MMC coolers