KTR U.K. Ltd. | Robert House | Unit 7 | Acorn Business Park | Woodseats Close | Sheffield | South Yorkshire | S8 0TB | Tel: 0114 258 7757 | Fax: 0114 258 7740

BoWex® Spec.-I/CD

BoWex<sup>®</sup> Spec.-I/CD
  • torsionally rigid
  • relatively short shaft distance
  • double-cardanic
  • absorbs angular misalignment
  • absorbs radial misalignment
  • absorbs axial misalignment
  • 100 degree max. operating temperature
  • maintenance-free

Product features

  • Double cardanic curved-tooth gear coupling®

  • Design for sliding rotor motors

  • For larger axial displaceability

  • Maintenance-free due to material combination nylon/steel

  • Operative range -25° C to +100° C"

Contact

KTR U.K. Ltd
T +44 (0)114 258 7757
F +44 (0)114 258 7740
E uksales@ktr.com

BoWex® Curved-tooth gear couplings® are flexible shaft connections for a
positive torque transmission and specifically suitable to compensate for
axial, radial and angular shaft misalignment. According to the well-known effect of curved-tooth gear couplings® any edge pressure in the spline in case of angular and radial displacements is avoided so that BoWex® couplings are almost free from wear.

General description

The material combination of steel hubs and polyamide sleeves allows for maintenance-free continuous operation with very low friction on the teeth.

Due to the double cardanic operation of BoWex® couplings restoring forces may be neglected in case of angular and radial displacements and periodic fluctuations in angular velocity do not arise.

BoWex® couplings can be assembled both vertically or horizontally with no need for any special assembly tools.

Behavior of friction and wear

The smooth and hard surface (crystalline structure) and the high thermal stability and resistance to lubricants, fuels, hydraulic fluids, dissolvents, etc. make polyamide an ideal material for components stressed by sliding, particularly for the coupling production.

While any metallic materials tend to "corrode" in case of dry running, slide combinations with polyamide and steel are operative without any lubrication and maintenance.

136
Share
 
 
 
 
 
 
 
 
 
 
 
 
KTR360°