KTR U.K. Ltd. | Robert House | Unit 7 | Acorn Business Park | Woodseats Close | Sheffield | South Yorkshire | S8 0TB | Tel: 0114 258 7757 | Fax: 0114 258 7740

REVOLEX® KX-D grey cast iron

REVOLEX<sup>®</sup> KX-D grey cast iron
  • 80 degree max. operating temperature
  • Atex
  • absorbs axial misalignment
  • absorbs radial misalignment
  • absorbs angular misalignment
  • torsionally elastic
  • torsionally dampening
  • relatively short shaft distance
  • maintenance-free

Product features

  • Torsionally-flexible pin & bush coupling

  • Maintenance-free

  • Radially mountable/removable

  • Machined all over, good dynamic characteristics

  • Hub material grey cast iron (ENJ 12345), protected surfaces (phosphated)

  • 14 sizes for torques from 8,650 to 400,000 Nm

Contact

KTR U.K. Ltd
T +44 (0)114 258 7757
F +44 (0)114 258 7740
E uksales@ktr.com

REVOLEX® is a torsionally-flexible, failsafe pin & bush coupling. It can be plugged in axially and is characterized by its short design. In addition, REVOLEX® allows for an easy disassembly of the elastomer rings including the pins while being assembly. The REVOLEX® coupling compensates for every kind of shaft misalignment while transmitting the torque safely.

REVOLEX® KX-D grey cast iron
Show specifications

Operation/Arrangement

The coupling consists of two hubs that are identical in construction. The pins and pocket holes alternate on the outer pitch circle. The torque is transmitted via the steel pins with their taper elastomer rings and the corresponding bores in the bush hub.

As a result all kinds of shaft misalignment, for example caused by inaccurate alignment of the driving or driven elements, is compensated for reliably and vibrations and shocks are compensated for excellently.

The coupling is maintenance-free and is used in general engineering and the pump industry, conveyor technology, etc. For an optimum adjustment to the different applications, 21-off sizes are available covering torques up to 1,220,000 Nm. Apart from the standard programme customized solutions are available. 

ATEX standard

ATEX standard

This type is certified and confirmed according to directive 2014/34/EU as unit of category 2G/2D and thus suitable for the use in hazardous areas of zone G1, G2, D21 and D22.

138
Share
 
 
 
 
 
 
 
 
 
 
 
 
KTR360°