Size 300 - 800

Bellhousing (cast iron) PG

Casted bellhousings - suitable for hydrostatic drives particularly for servo hydraulics

Bellhousings made of cast or nodular iron for applications with special demands, e. g. high weight loads and shocks due to operation, but also for maritime use (salt water) and underground.

Type PSG was particularly developed for drives with servo motors which is the reason for the rectangular flange.

Features
  • Material: cast iron - higher stiffness than aluminium
  • Applicable in mining and offshore
  • Used on servo motor applications
  • Good noise damping properties
  • Horizontal arrangement in combination with KTR foot flanges possible
  • Bellhousings available with venting hole and oil bleed on request
     
Send product request

Bellhousing as a connection element in power pack manufacture

In power pack manufacture bellhousings are used as a connection element between electric motor and hydraulic pump. They center the shafts of motor and pump and additionally serve as coupling protection.

Our bellhousings type PK and PL were manufactured based on the latest knowledge of designing and casting. All new designs are optimised via the FEM method beforehand and tested in our in-house test centre on completion. Flange collar and length of the brackets correspond to VDMA standard 24561.

The bellhousings are available in the materials aluminium, cast iron, nodular iron and steel.

To optimise the noise behaviour of the power packs, it is possible to provide the bellhousings with damping elements.

Selection of bellhousings:

The selection program of bellhousings will allow you to find the right components to optimally connect electric motor and pump. Depending on the application you are in a position to select appropriate additional components such as damping elements and foot flanges.

5 steps are sufficient for a complete selection:
1st step : selection of pump manufacturer
2nd step: selection of pump type
3rd step : selection of electric motor
4th step : selection of potential coupling versions
5th step : selection of extra components

Done! The selection can be printed as a PDF or DXF file or can be transferred immediately in the web shop.

  • KTR damping rings type "DT"
  • KTR foot flanges and respective damping rods

More products in this area "Bellhousing"