BoWex® Spec.-I

BoWex<sup>®</sup> Spec.-I
  • torsionally rigid
  • relatively short shaft distance
  • double-cardanic
  • absorbs axial misalignment
  • absorbs radial misalignment
  • absorbs angular misalignment
  • 100 degree max. operating temperature
  • maintenance-free

Product features

  • Double cardanic curved-tooth gear coupling®

  • Axial plug-in, for blind assembly

  • For all applications in the range of mechanical engineering and hydraulics

  • Maintenance-free due to material combination nylon/steel

Contact

Sales BoWex®
T + 49 (5971) 798-0
F +49 (5971) 798-698
E sales@ktr.com
Engineering BoWex®
T +49 (5971) 798-357
F +49 (5971) 798-6357
E info-bowex@ktr.com

BoWex® Curved-tooth gear couplings® are flexible shaft connections for a
positive torque transmission and specifically suitable to compensate for
axial, radial and angular shaft misalignment. According to the well-known effect of curved-tooth gear couplings® any edge pressure in the spline in case of angular and radial displacements is avoided so that BoWex® couplings are almost free from wear.

Behavior of friction and wear

The smooth and hard surface (crystalline structure) and the high thermal stability and resistance to lubricants, fuels, hydraulic fluids, dissolvents, etc. make polyamide an ideal material for components stressed by sliding, particularly for the coupling production.

While any metallic materials tend to "corrode" in case of dry running, slide combinations with polyamide and steel are operative without any lubrication and maintenance.

General description

The material polyamide allows for maintenance-free continuous operation with very low friction on the teeth.

Due to the double cardanic operation of BoWex® couplings restoring forces may be neglected in case of angular and radial displacements and periodic fluctuations in angular velocity do not arise.

BoWex® couplings can be assembled both vertically or horizontally with no need for any special assembly tools.

102
Share
 
 
 
 
 
 
 
 
 
 
 
 
KTR360°