Plate heat exchanger with soldered stainless steel plates
The PHE oil-water cooler is a soldered plate heat exchanger made up of two end plates, specifically corrugated flow plates and four connections.
The stamped plates of the plate heat exchanger are made of stainless steel and soldered with copper, they generate high power density in tight spaces.
Vacuum brazing of the contact points produces a permanently sealed, compact and pressure-resistant heat exchanger that cannot be opened for inspections.
Compared to a bundle of pipes heat exchanger, the plate heat exchanger only requires approx. 25 - 30 % of mounting space with less weight.
Operating temperature: -10 °C - +200 °C
maximum permissible operating pressure: PHE 100: 10 bars / PHE 200 - 500: 30 bars
Cooling capacities up to 150 kW achievable
Volume flow of oil: 60 - 180 l/min
Volume flow of water: 30 - 120 l/min
The PHE plate heat exchangers are most suitable for clean water low in lime, for example with a closed cooling circuit. Our PHE oil-water cooler is provided with painting appropriate for marine applications (CDP + powder painting).
Applications are as follows:
It is possible to use other media, for example oil, water glycol, water, refrigerants, etc.
Plate heat exchanger made of stainless steel 1.4401 soldered to copper. The stamped plates generate a high power density in a tightspace. Compared to a bundle of pipes heat exchanger, the plate heat exchanger only requires approx. 25 % - 30 % of mounting spacewith less weight. Applications are, as an example, machine tools, test benches, moulding machines, pump units, waste heat utilization, etc.It is possible to use other media like, for example, oil, water glycol, water, refrigerating agents, air, etc.
Operating temperature: -10 °C to +200 °C.
Please observe boiling point and freezing point!
Maximum permissible operating pressure: PHE 100: 10 bar / PHE 200 - 500: 30 bars
Specifications for: Oil-water cooler PHE
Further information and specifications can be found in our online catalogue.
Find 2D CAD drawings for download here.
You need 3D drawings instead? Then please visit our 3D CAD library.
On our website, cookies and other functions are used, and these carry out the processing of our users' terminals information and personal data.
Some of them are urgently needed, whilst others fulfil the function of incorporating external elements, statistical analysis, company attribution or reach measurement.
And, in the process, some data is also forwarded to third-party centres, where the data is processed.
You can find the details concerning individual functions, concerning the recipients of data, concerning processing in the USA and concerning the storage period, under Further information.
This consent is elective; it is not a pre-requisite for using our website and it can be revoked at any time with future effect under Data protection settings. Consent remains valid until revoked.
Below, you can apply a single click to accept all functions, to save the selection you have made, and then close; or otherwise accept only essential cookies.