Certificates & Downloads
Intermediate shaft coupling with glued aluminium pipe
Easy, radial coupling assembly because of split coupling hub
Replacement of spider without shifting the driving and driven side
Lengths are possible up to 4 m without intermediate bearing dependent on speed and size
Low mass moment of inertia by using aluminium
For bridging large shaft distances there is ROTEX® GS type ZR3 being one out of three intermediate shaft couplings. The intermediate pipe made of aluminium is adjusted by KTR according to the shaft distance dimension indicated by the customer. The external shell clamping hubs allow to disassemble/assemble the intermediate shaft coupling radially.
Apart from the jaw-type geometry of the coupling hubs the zero backlash of the ROTEX® GS is mainly due to the geometry of the ROTEX® GS spiders. These are designed in a way that the convex teeth of the spider contact the concave jaws of the coupling hub under prestress. In combination with the straight toothing this results in a small surface pressure and an increased stiffness of the coupling system.
The flexible spiders for the GS series are available in five different kinds of Shore hardness. The different kinds of Shore hardness allow to adjust ROTEX® GS easily to the individual conditions of an application with regard to torsional stiffness and vibration characteristics.
The flexible teeth are radially supported by a web on the inside diameter. In this way deformation caused by heavy acceleration or high speeds is prevented.
The permissible ambient temperature of the coupling depends on the Shore hardness of the spider.