KTR Finland Oy | Tiistinniityntie 4 | 02230 Espoo | T +358 20 7414 610 | E ktr_fi@ktr.com

ROTEX® SP ZS-DKM-C

ROTEX<sup>®</sup> SP ZS-DKM-C
  • slipping, seperating, non fail-safe
  • radial assembly, service friendly
  • double-cardanic
  • torsionally elastic
  • torsionally dampening
  • consider shaft distance
  • absorbs axial misalignment
  • absorbs angular misalignment
  • absorbs radial misalignment
  • 120 degree max. operating temperature
  • Atex
  • maintenance-free

Product features

  • Cam geometry consists of conductive and high-strength plastics

  • Maintenance-free in hazardous areas

  • Failsafe and non-sparking

  • Material of hub base: steel, aluminium, others

  • Standard spacers up to a shaft distance dimension of 250 mm

  • Assembly/disassembly by means of 4 screws only

  • Compensating for big shaft displacements due to the double-cardanic structure

  • Low restoring forces, thus increase of overall service life of all adjacent components (bearings, gaskets, etc.)

  • Assessed and confirmed for the use in hazardous locations in accordance with EC standard 94/9/EC (type 7.6 marked from stock, type 7.5 half shell clamping hub without feather

  • keyway acc. to category 3)

Contact

KTR Finland Oy
T +358 20 7414 610
E ktr_fi@ktr.com
Engineering ROTEX®
T +49 (5971) 798-214
E info-rotex@ktr.com

ROTEX® couplings are characterized by small dimensions, low weight and low mass moments of inertia yet transmit high torques. Running quality and service life of the coupling are improved by accurate all-over machining. Their application is ideal for transmitting torque while damping torsional vibrations and absorbing shocks produced by the uneven operation of certain prime movers.ROTEX® couplings are equipped with the new temperature resistant T-PUR® spider which is available in three different degrees of Shore hardness.

Performance

Performance

n contrast to other flexible couplings, the intermediate members of which are subject to bending stress and are therefore prone to earlier wear, the flexible teeth of ROTEX® couplings are subject to pressure only. This gives the additional advantage of the individual teeth being able to accept considerably higher loads.

The elastomer parts show deformation with load and excessive speeds. Sufficient space for expansion should be ensured.

The maximum torsion angle with ROTEX® couplings of any size amounts to 5°. They can be fitted both horizontally and vertically.

T-PUR® - The new heart of ROTEX®

T-PUR<sup>®</sup> - The new heart of ROTEX<sup>®</sup>

With the temperature-resistant polyurethane T-PUR® of KTR the properties of the ROTEX® have been optimized importantly. T-PUR is a much more temperature-resistant and has a longer service life than polyurethane material. From the visual point of view we have characterized the material T-PUR® by the colours orange (92 Shore A), purple (98 Shore A) and pale green (64 Shore D). The previous spiders made from polyurethane in yellow, red and natural white with green ends will still be available.

 

Spider generation T-PUR® (PDF)

 

 

ATEX standard

ATEX standard

This type are certified and confirmed according to directive 2014/34/EU as units of category 2G/2D and thus suitable for the use in hazardous areas of zone G1, G2, D21 and D22.

465
Share
 
 
 
 
 
 
 
 
 
 
 
 
KTR360°