KTR Finland Oy | Tiistinniityntie 4 | 02230 Espoo | T +358 20 7414 610 | E ktr_fi@ktr.com

BoWex® junior M

BoWex<sup>®</sup> junior M
  • corrosion-protected
  • torsionally rigid
  • axial plug-in
  • relatively short shaft distance
  • absorbs radial misalignment
  • absorbs angular misalignment
  • absorbs axial misalignment
  • 100 degree max. operating temperature
  • maintenance-free

Product features

  • Double cardanic coupling, three-part, made from nylon

  • Maintenance-free due to material combination nylon

  • Low own weight as well as low flywheel torques

  • Operative range -25° C to +100° C

  • Including feather keyway

Contact

Sales BoWex®
T + 49 (5971) 798-0
F +49 (5971) 798-698
E sales@ktr.com
Engineering BoWex®
T +49 (5971) 798-357
F +49 (5971) 798-6357
E info-bowex@ktr.com

BoWex® Curved-tooth gear couplings® are flexible shaft connections for a
positive torque transmission and specifically suitable to compensate for
axial, radial and angular shaft misalignment. According to the well-known effect of curved-tooth gear couplings® any edge pressure in the spline in case of angular and radial displacements is avoided so that BoWex® couplings are almost free from wear.

General description

The material polyamide allows for maintenance-free continuous operation with very low friction on the teeth.

Due to the double cardanic operation of BoWex® couplings restoring forces may be neglected in case of angular and radial displacements and periodic fluctuations in angular velocity do not arise.

BoWex® couplings can be assembled both vertically or horizontally with no need for any special assembly tools.

Behavior of friction and wear

The smooth and hard surface (crystalline structure) and the high thermal stability and resistance to lubricants, fuels, hydraulic fluids, dissolvents, etc. make polyamide an ideal material for components stressed by sliding, particularly for the coupling production.

71
Share
 
 
 
 
 
 
 
 
 
 
 
 
KTR360°