ROTEX® GS Cubos de anillos de sujeción light

ROTEX<sup>®</sup> GS Cubos de anillos de sujeción light
  • ligero
  • apto para grandes revoluciones
  • sin juego
  • amortiguante
  • torsionalmente flexible
  • montaje axial
  • comprobación de la distancia de eje
  • temperatura de trabajo máx. 90 grados
  • aislado eléctricamente
  • sin mantenimiento
  • Atex

Product features

  • Sistema de sujeción integrado de aluminio

  • Montaje sencillo por tornillos de sujeción internos y montaje en bloque

  • Elevados pares de unión por fricción, elevada suavidad de marcha

  • Empleo hasta una velocidad periférica de 50 m/s

Contact

Sales Servo Couplings
T +49 (5971) 798-0
F +49 (5971) 798-698
Engineering ROTEX® GS
T +49 (5971) 798-0
E info-rotex-gs@ktr.com

The clamping ring hub light is our optimized clamping ring hub design (alu hub/steel ring) with internal clamping screws. The aluminium hub and the aluminium ring offer a low mass moment of inertia. Thanks to the block assembly the assembly is really easy. The ROTEX® GS light is particularly suitable for the transmission of high friction torques as well as for high-speed applications. This is the optimal coupling for each main spindle.

ROTEX® GS Cubos de anillos de sujeción light
Show specifications

Performance

Apart from the jaw-type geometry of the coupling hubs the zero backlash of the ROTEX® GS is mainly due to the geometry of the ROTEX® GS spiders. These are designed in a way that the convex teeth of the spider contact the concave jaws of the coupling hub under prestress. In combination with the straight toothing this results in a small surface pressure and an increased stiffness of the coupling system. 

Spiders

The flexible spiders for the GS series are available in five different kinds of Shore hardness. The different kinds of Shore hardness allow to adjust ROTEX® GS easily to the individual conditions of an application with regard to torsional stiffness and vibration characteristics.

The flexible teeth are radially supported by a web on the inside diameter. In this way deformation caused by heavy acceleration or high speeds is prevented.

The permissible ambient temperature of the coupling depends on the Shore hardness of the spider.

Explosion-proof use

Explosion-proof use

This type is certified and confirmed according to directive 2014/34/EU as unit of category 2G/2D and thus suitable for the use in hazardous areas of zone 1, 2, 21 and 22.

Please read through our information included in the respective Type Examination Certificate and the operating and mounting instructions.

Exlposion-proof use

This type is certified and confirmed according to directive 2014/34/EU as unit of category 2G/2D and thus suitable for the use in hazardous areas of zone 1, 2, 21 and 22.

Please read through our information included in the respective Type Examination Certificate and the operating and mounting instructions.

If clamping ring hubs (clamping hubs without keyway are only permitted for category 3) are used in hazardous areas the coupling must be designed in a way that between the peak torque including all operating parameters and the torque of frictional engagement and the nominal torque of the coupling, resp., there is a safety of at least s=2

345
Share
 
 
 
 
 
 
 
 
 
 
 
 
KTR360°