KTR CR, spol. s r.o. | Brněnská 559 | 569 43 Jevíčko | T +420 461 325 014 |

BoWex® Corrosion-proof material

BoWex<sup>®</sup> Corrosion-proof material
  • antikorozní povrchová úprava
  • torzně tuhé
  • axilání montáž
  • relatively short shaft distance
  • princip dvojitého kardanu
  • kompenzace axiláního vyosení
  • kompenzace radiálního vyosení
  • kompenzace úhlového vyosení
  • 100 degree max. operating temperature
  • bezúdržbové

Product features

  • Označení materiálu V4A, 1.4571

  • Pro použití v agresivním prostředí

  • Oblasti použití: potravinářský průmysl, tiskařský průmysl, textilní průmysl, kanalizační technologie, myčky, chemický a farmaceutický průmysl, zařízení na moři

Contact

Prodej
T + 420 461 619 587
E ktr-cz@ktr.com
Technická podpora
T +420 461 325 014
E ktr-cz@ktr.com

BoWex® Curved-tooth gear couplings® are flexible shaft connections for a
positive torque transmission and specifically suitable to compensate for
axial, radial and angular shaft misalignment. According to the well-known effect of curved-tooth gear couplings® any edge pressure in the spline in case of angular and radial displacements is avoided so that BoWex® couplings are almost free from wear.

BoWex® Corrosion-proof material
Show specifications

Behavior of friction and wear

The smooth and hard surface (crystalline structure) and the high thermal stability and resistance to lubricants, fuels, hydraulic fluids, dissolvents, etc. make polyamide an ideal material for components stressed by sliding, particularly for the coupling production.

While any metallic materials tend to "corrode" in case of dry running, slide combinations with polyamide and steel are operative without any lubrication and maintenance.

General description

The material combination of steel hubs and polyamide sleeves allows for maintenance-free continuous operation with very low friction on the teeth.

Due to the double cardanic operation of BoWex® couplings restoring forces may be neglected in case of angular and radial displacements and periodic fluctuations in angular velocity do not arise.

BoWex® couplings can be assembled both vertically or horizontally with no need for any special assembly tools.

89
Share
 
 
 
 
 
 
 
 
 
 
 
 
KTR360°