Certificates & Downloads
Vysoce výkonná celoocelová lamelová spojka pro vysoké otáčky v náročných pohonech
Kompaktní konstrukce C s příznivým poměrem výkonu a rozměrů
Momenty až 330 000 Nm
Možnost radiální montáže a demontáže mezikusu
Délka mezikusu dle požadavku zákazníka
Torzní tuhost je optimalizována dle parametrů pohonu
Splňuje normu API 671
RIGIFLEX® couplings are used on such applications which require a reliable and maintenance-free torque transmission with shaft displacement at the same time. The laminas are waisted lamina sets arranged in layers. They are connected to the hubs or flanges, respectively, in an absolutely backlash-free fit by means of positive-locking set screws.
RIGIFLEX® laminae are waisted laminae sets arranged in layers. They are connected to the hubs or flanges, respectively, in an absolutely backlash-free fit by means of positive-locking set screws. The number of the layers of individual laminae allows to vary torques, displacement figures and stiffness for special designs.
Since our main idea with the development of RIGIFLEX® couplings was to comply with the standards of API 610 and API 671, the spacer is secured by a safety catch, too. In case that the laminae break the spacer remains within the coupling.
In general the removable part is supplied along with a laminae set preassembled by the manufacturer.
The RIGIFLEX®-HP corresponds to the specifications of the API 671 standard. The RIGIFLEX®-HP is designed for the use in high-performance applications in particular. This coupling type is especially used in high-speed drive trains that need to be customized regarding torsional stiffness and mass distribution to meet the requirements of the whole system. Typical application areas of the RIGIFLEX®-HP are:
High-speed pump drives