Certificates & Downloads
Přirubová spojka s rozměry dle SAE nebo dle požadavků zákazníka
Použití pro spalovací motory
Kompenzace vyosení hřídelí
Snadná montáž nasunutím dílů bez použití šroubů
Náboje odpovídají standardní řadě BoWex®
Provedení otvorů v souladu s ISO v toleranci H7
Drážky podle DIN 6885 strana 1 – JS9
Dostupné v tvrdostech 40, 50 a 65 ShA
Speciální rozměry na přání zákazníka
Mobile machines mainly use I.C.-engines as a drive. On hydrostatic drives hydraulic pumps are directly connected, while the compressor unit is driven directly with mobile compressors. Both units are connected via a flange coupling. That is why it has to meet a large number of demands, while primarily it has to transmit the power reliably to ensure that the machine is in a position to perform the work as required.
For drives subject to dangerous torsional vibrations to transmit the torque flexibly for the combination of diesel engine with splitterbox, generator, compressor, feed pump or high-pressure pump, etc.:
BoWex-ELASTIC® is highly flexible combining the benefits of the well-approved BoWex® system in a compact design with the option of an axial plug-in assembly inside the curved toothing. Torsional vibrations and shock loads are damped and reduced. Also, the coupling allows for compensation of radial, angular and axial inaccuracies in alignment with extremely low restoring forces.
BoWex-ELASTIC® consists of a highly flexible, rubber element made from natural rubber which is governed by the size of the coupling. The internal axial plug-in hub with external spline corresponds to the BoWex® basic design. BoWex-ELASTIC® is available in different kinds of elastomer hardness with engine flywheel connection flanges to SAE J620 and special dimensions for a power up to 1,000 kW.
The smooth and hard surface (crystalline structure) and the high thermal stability and resistance to lubricants, fuels, hydraulic fluids, dissolvents, etc. make polyamide an ideal material for components stressed by sliding, particularly for the coupling production.
For connecting hydraulic pumps to the diesel engine KTR supplies mounting flanges according to SAE connection dimensions sizes SAE 6 to SAE 1. These flanges are made of steel and EN-GJL--250 (GG25) for hydraulic pumps with flange connections according to SAE-A, -B, -C, -D and -E as types with 2 and 4 holes.
Pump connection housings made of EN-GJL-250 (GG25) to be mounted directly to the back plate of the engine.