KTR CR, spol. s r.o. | Brněnská 559 | 569 43 Jevíčko | T +420 461 325 014 |

TOOLFLEX® KN

TOOLFLEX<sup>®</sup> KN
  • 200 degree max. operating temperature
  • pro vysoké otáčky
  • backlash-free
  • torzně tuhé
  • relatively short shaft distance
  • kompenzace axiláního vyosení
  • kompenzace radiálního vyosení
  • kompenzace úhlového vyosení
  • bezúdržbové

Product features

  • Vlnovec se 6-ti ohyby standardně (se 4-mi na přání)

  • Dělený svěrný kuželový náboj s optimální soustředností, daná symetrickou konstrukcí spojky

  • Kroutící momenty od 35 do 350 Nm

  • Náboje ocelové

  • Vysoké třecí momenty

  • Vhodný pro celou škálu aplikací se servomotory

Contact

Prodej
T +420 461 619 587
E ktr-cz@ktr.com
Technická podpora
T +420 461 325 014
E ktr-cz@ktr.com

TOOLFLEX® is a torsionally stiff, flexible metal bellow coupling with a bellow from stainless steel and coupling hubs from aluminium (in size 55 and 65 as well as with type KN the coupling hubs are from steel). The metal bellow compensates perfectly for axial, radial and angular displacements. At the same time its geometric shape allows for high torsional stiffness and a low mass moment of inertia.
In addition it is resistant to media influences and critical operating conditions. For different applications and assemblies the TOOLFLEX offers various hub designs as well as two different bellow lengths. The combination of these single parts forms one type.

Balganbindungen

The connection between bellow and hub is guaranteed by three different designs, dependent on the size. As for size 5 to size 12 the bellow is glued to the coupling hub, therefore ambient temperatures from -30° C to +100° C are permissible for these TOOLFLEX sizes. As for size 16 to size 45 the bellow-shaft connection is guaranteed by a flanged connection making sure for a torque transmission with each single bellow layer. The bellow-hub connection of the TOOLFLEX 55 and 65 is guaranteed through a welding connection.

250
Share
 
 
 
 
 
 
 
 
 
 
 
 
KTR360°