KTR CR, spol. s r.o. | Brněnská 559 | 569 43 Jevíčko | T +420 461 325 014 |

Připravujeme pro Vás novou verzi webových stránek, která bude spuštěna v červnu 2020. Stávající stránky nejsou plně funkční, proto prosím do té doby využijte některou z jazykových mutací na www.ktr.com, nebo nás přímo kontaktujte.

Tank heater TEHM

Tank heater TEHM

Vlastnosti produktu

  • Tank heater with magnetic clamp

  • The tank heater is most suitable to retrofit machines

  • For direct assembly in the oil tank

  • To be mounted horizontally to the tank ground or vertically to the tank wall

  • By means of the magnetic clamp

  • Controling by means of an installed thermostat

  • With preset cut-in or cut-off temperatrue, respectively

  • The connection cable can easily be directed to the outside

  • Oil drain and welding of a drain plug is not necessary

The following steps are vital for the right selection of the tank heater:

  • Selection of type of heater EHP, EH with or without control 
  • Calculation of the heating power required or the heating time matched with your tank size. 
  • Input of the heating power (KW) or scheduled heating time (h) 
  • Input of oil volume 
  • Input of requested oil temperature 
  • Input of ambient temperature= Oil temperature start 
  • Input of oil type 
  • Input of max. immersion depth in the tank 
  • Start selection with the button > Start 

The optimum as well as next bigger and smaller tank heater is displayed to you now. Other data for downloading and looking at are available via the buttons

  • company catalogue 
  • mounting instructions DE, EN. 

It goes without saying that the KTR team will be pleased to answer further questions.