KTR CR, spol. s r.o. | Brněnská 559 | 569 43 Jevíčko | T +420 461 325 014 |

Připravujeme pro Vás novou verzi webových stránek, která bude spuštěna v červnu 2020. Stávající stránky nejsou plně funkční, proto prosím do té doby využijte některou z jazykových mutací na www.ktr.com, nebo nás přímo kontaktujte.


KTR-STOP<sup>®</sup> YAW L

Vlastnosti produktu

  • Clamping forces of up to 542 kN

  • Short reaction periods subject to the short distance between brake pad and brake disc as well as the low oil volume

  • Big pad surface resulting in small surface pressure, low wear of pads and low temperature

  • Low maintenance expenses because of a few mobile components only

  • Drain ports avoid leakages on the brake pad

  • Brake pads available from various materials

  • Easy replacement of brake pads

  • Suitable for rough ambient conditions

KTR-STOP® brake systems designed as yaw brakes show their full strength with aligning and locking the pod in the wind. The permanent swap between „STOP and GO“ requires particularly low-wear components with clamping forces of up to 542 kN for each brake to protect the plant permanently against gusts of wind and pulsating load. With large plants up to twelve active disk brake calipers covering the aforementioned performance are used.