KTR do Brasil Ltda | Rua Jandaia do Sul 471, Emiliano Perneta | 83324-440, Pinhais - PR - Brasil | Tel +55 (41) 3669-5713 | E-mail: ktr-br@ktr.com

RADEX®-N NN

RADEX<sup>®</sup>-N NN
  • 280 degree max. operating temperature
  • torsionally rigid
  • backlash-free
  • consider shaft distance
  • maintenance-free
  • absorbs axial misalignment
  • absorbs angular misalignment
  • Atex

Product features

  • Single-cardanic design

  • Only angular and axial displacements are permitted

  • Highest torsional stiffness

  • Short design

FEM-optimized laminae form

The steel laminae packings from stainless spring steel were developed on the basis of FEM calculations. Under consideration of the necessary possibilities of displacements of the coupling the optimal form regarding torque transmission and torsional rigidity was aimed for. The fitted form of the steel laminae at the outside diameter is the result of this optimization calculation.

Laminae packings with dowel screws

The „heart“ of the steel laminae coupling are the laminae packings and their connection to the hubs or spacers.

High-strength, special dowel screws that are alternately screwed with hubs and spacer enable a combination of frictional engagement and positive locking. Thus a high power density with simultaneous easy displacement and low restoring forces is guaranteed.

Due to the special constructive design of the RADEX®-N components the laminae packings are „artificially“ prestressed. Hereby the torsional rigidity of approx. 30 % is enabled and at the same time the known problem regarding the axial vibrations of the spacer is avoided.

ATEX standard

ATEX standard

This type are certified and confirmed according to directive 2014/34/EU as units of category 2G/2D and thus suitable for the use in hazardous areas of zone G1, G2, D21 and D22.

264
Share
 
 
 
 
 
 
 
 
 
 
 
 
KTR360°